PICCOLO


Ter Allrounder for diameters up to 250mm  - worldwide!

 
Technical data
Drill holes up to  250 mm
Drill travel 700 mm
Feed speed 1:1:6
Hand crank pluggable on both sides
Feed carriage Wheel driven feed gear with excentric adjustment
Adjustable up to 45°
   
Dimensions
Width 240 mm
Depth 370 mm
Height 1000 mm
Weight 12 Kg
   
Downloads
Produkteprospekt (pdf)
Video (youtube)
Locking device

The device feed carriage can be locked at any tooth of the gear rack by a slight sideways movement of the deten plate.

 

Thighten device 60 mm

Easy mountable on every Piccolo feed carriage. This
device is developed for every drill motor with 60 mm
clamping fixture.

Diese kann leicht an jeden Vorschubwagen „PICCOLO“
montiert werden. Die Aufnahme ist für jeden Bohrmotor
mit 60 mm Spannhals geeignet.
 

Quick release coupling

The quick release coupling makes it easy for you to
separate the drill motor from the rig. E.g. to fit it to a
wall or to exchange the drill motor.




Selection guide "quick coupling" Demco Technic AG
 

schnellkupplung_piccolo_5_5Kopie.jpg

Vacuum base

Drill rig Piccolo can be used with Demco’s vacuum
base. The vacuum base is equipped with a hand switch
valve, vacuum ON / OFF.

 

Option: Autom. feeding system Subito

Ideal for single or row drilling.
Higher efficiency by the simultaneous use of two
or more units.
Higher lifspan of the diamond core bit (up to 30 %) due to constant feed pressure.
Optimal load of the drill engine due to the use of
constant feed pressure.
Beneficial for multi bores within short distance,
with two or more machines, or when extra work is
done, e.g. water draining.

 
Option: Gear reduction POCO

Can be used with drill rigs NINO, PICCOLO, MEZZO
and SUMO. (Reduction = 2:1) The contact pressure
of the drill bit can be reached with a small amount
of pressure. The gear reduction can be attached
on the left and on the right. It is a smart strength
saving accessory.